Recent content by Somerset

Thanks for the advice. Sorry, was offline for a while due to hard drive failure. I decided it sounded more trouble than it was worth. I bought a new printer. My son, who has time on his hands and tinkers might try his hand at it. If the printer ends up destroyed then not too much lost . . ...

I took the opportunity to remove both pads and clean them. The one for the colour came clean right away, the black one is being stubborn. I used window cleaner and cleaned the area where the pads sit, then put some cleaner back in as you directed. Neither one seems to be sucking the fluid...

Did the nozzle check and liquid did in fact stay there. What is my next step? Thanks for the help again. Somerset

I just had a look and it seems there is wet ink on top of the pads? I put a bit of water on the pads as suggested in the other post (Windex not handy) and closed the cover. After it did its thing, I opened the cover and the extra moisture appeared still sitting there. So, is that the answer...

Hi All, I used to get my cartridges refilled at a local refiller but the ownership has changed and I was unhappy the last time with the new level of service. So, I decided to try it myself. I had problems with the pgbk ink printing and, even after multiple cleanings, soaking (70% ipa), etc it...