Luckly I have 4 lines but one with 100 Ohm ( DATA OUT ) between the pin and the beginning of the flatcable . I had my meter on noise :( not on ohm so i didnt hear the buzzer bell when 100 ohm was in the way . .. please check chip picture...
I remember :/ ... I did not used 3 original Canon colour cardriges because i moved these chips to 3 new Oem cardriges and buyed a unused new PGBK 5 to but .. but this was OEM cardrige but sure the chip was never removed. All are dimmed and not able for reset . I am sure i put the ink toners in...
Humm mayby but unlikely , i looked at that and 4 is a lot ! but I can not check anymore ... the chips are original Canon and reset twice i think. Posibllity : mayby there is a control line that is broken i will see but can compare this tomorrow ..
:mad: A Very nasty discovery and I know your right ! I dont know what is the course of this, mayby the software (update) is changed to drop the new reset cardriges who knows . To Lin , correct , indeed i have all 4 dimmend after flashing when first time checked by the printer and i can not make...
I saw a solution with the ink recognise problems and mayby i have found the source of this mechanical problem very likely the flap of the CD / DVD print option is not closed enough ( ) . The flap puches the rail upways, when open but this also carries the sensor and the reason if the flap is...
Uhmm Websnail , you are jalouse man thats very clear , i dont need you to tell me what i not knew about , reinventing the wheel ? go to sleep i am buzzy and your "ideas" are not new if you know what i mean !
:mad: Websnail.. You mean the resetter for Canon chps .. that is a total differante thing and far to expensive ( 450 euro ) :)
This smart principe can be made by yourself in whatever printers there are ! I am shure nobody came up with this excellent idea all over ink-jet . :lol:
[fotofreek]
Just picked up the following post on the printer newsgroup - anyone tried this?
--------------------------------------------------------------------------------------------
There are 4 pins on the chip: Vcc, GND, CLK and Data. The GND pin is the longest one, the second from the...
I have found some new understandings of ink indication and want to use share it for experiment , for a better understanding of this i have a picture here .
In the rail are two sensors build in . These sensors receive the ( broken coloure ) lights that the led on the chip shines, the chip that...
I would like to mention that the measuring of the ink leavel is not only done by the cardrige chip . Look what i have found , this senson light measure controls the right position of the cardriges so you always put it in right position. I also think this is the indicator for the ink niveau (...
The only reason i could think of is a internal connection to the CLK pin . Infact measuring the 4 pins in the cardrige adopter : ( from the right to the left ) the Vcc has 3.3 volt with the Ground , the CLK pole also make 3.3 V and a 1.65 volt brige with the Data pin. :/
Indeed i have the same problem with a reset for the chips , and not only the black but the colours to . Now i am buzzy with a nother refil system as you may know ... the point is that i can not make it easy for making a connection and build inn a cable guide that be used for gooing outside the...
Can you tell me why they developed a hardware resetter ?
and my colour cardriges did not want a reset the usual way and they totaly "dimmend" - sorry infact the leds are out now , happend After 48 hours printer standby = dooing nothing , in the mean while i did some computer restarts .. then...