Recent content by Samo

  1. Samo

    Photosmart Pro b9180 Vs Epson L1800

    The rear sensor was a first suspect. But the suspicion was not confirmed. Finally I found an error in the optical sensor in the print head carriage. In the meantime, however, two printheads dried up and three colors passed (I am using 120ml HP70). As I use it only for home printing (few prints...
  2. Samo

    Photosmart Pro b9180 Vs Epson L1800

    Yes, I have try this yesterday, the printer just need to be powered on. Yes. The voltage should then go down from Hi do Low.
  3. Samo

    Photosmart Pro b9180 Vs Epson L1800

    You can skip all the steps mentioned above (fill the carts, reset the chips, install the really bad HP drivers and software…). Just connect the printer to the power, turn it on, open the top cover and the ink compartment cover (this step will bypass all the initial checks) and then measure...
  4. Samo

    Photosmart Pro b9180 Vs Epson L1800

    Hi Martin, Samo is my real name :) Sorry for the delay, but I did not have access to the printer during the week. I do not have an illustrated version, I found this link a couple of weeks ago when I tried to solve a similar problem. But I was able to find out which cables are mentioned in the...
  5. Samo

    Photosmart Pro b9180 Vs Epson L1800

    Hi, if you still have this printer, try this workaround: https://web.archive.org/web/20101210055243/http://members.cox.net:80/technconsult/a_partial_fix_for_your_hp_b9180_.htm It is very old guide, the original webpage does not exist, so it is without pictures.
Top