Thanks. I have recently attended a workshop where we had access to Epson P906 printers (the numbering system for the P900 sold in Australia). We also had access to a large amount of Canson PK and MK papers. As the owner of an Epson 3800 it was such a pleasure to print an image on a PK paper...
Hi Kjell.
I bought a badly blocked Epson 7880 a few years ago and, because half the cartridges were empty, used Inktec ink, initially to flush the printer clean and get it going and subsequently to learn about creating icc profiles using ArgyllCMS. I also have an Epson 3880 which has OEM ink...
I recommend Roy Harrington's Print Tool (http://quadtonerip.com/html/QTRprinttool.html) for printing in general. It has three options for Color Management: No Color Management; Print-Tool Managed; and Printer Driver Managed. It also has an Epson ABW mode check box.
I use the No Color...
I bought an Epson 3800 that had been sitting unused for more than 5 years. It's nozzle check print was worse than yours and wouldn't complete the nozzle print either. I forget the error number but it wasn't relevant. Unlike you, I couldn't get any good prints. My research lead me to the...
Thanks for details. I have an i1Pro2 which gives me access to i1Profiler but I only use it for screen profiling because it is much easier to use the much older DTP70 that scans a whole page at a time like the i1iSys. Apparently I can use the output from these scans in i1Profiler but I have...
This has been a very interesting, and fast developing, discussion. I am amazed at the gamut volume figures - all above 1.2 million units. I use an old X-Rite DTP70 with ArgyllCMS to generate icc printer profiles for an Epson 7880 and an Epson 3880. I have OEM ink in the 3880 and get gamut...
It was surprisingly difficult to locate a Brother DCP-J1100DW in Australia, but, I have tracked one down and it is due to be delivered in early October. Thanks for the range of comments and advice. I will follow up with an assessment of the printer after 6 to 12 months use.
I hadn't looked at the Brother Inkjet printers but have just downloaded the DCP-J1100DW brochure. It seems to tick all of the functionality boxes, except for a maintenance tank, which I wouldn't expect on such a small printer anyway. Thanks for the tip about generic ink. Do you use a...
My current Epson WF 4360 is used intermittently by my wife and myself. All its functions work fine except that the magenta channel regularly clogs. Clearing the clog is tedious, time consuming, ink consuming and occasionally and temporarily successful. A sickly green cast is a continuing...
Thanks Artur5. I wondered if the MegaTank printers were more robust and reliable than the versions using cartridges and your response and experience with an MB5150 is very reassuring. I checked some prices in Australian dollars and the Maxify MegaTank that The Hat reviewed a few years ago is...
Thanks. Have discovered your comments on the Maxify MegaTank from a few years ago. Very reassuring that it continues to give good service on the sort of intermittent use that is similar to my use pattern. The Maxify MegaTank is at the top end of my budget so I will find out more on the lower...
I am looking for a reliable home printer. My use is relatively low volume and intermittent. I prefer a printer that will auto print both sides of a page. I like the bulk ink concept of the MegaTank printers. My current Epson Workforce printer works perfectly well as a B&W printer but the...
Thanks Ink stained for comments. I used to use LightRoom for printing but that option has been cut off since I upgraded my MacBook Pro to MacOS Big Sur. This version of operating system does not support a driver for my Epson 7880. The Epson print drivers that I have tracked down on the US...
I have an Epson Stylus Pro 7880. I usually use sheet paper of A4, A3 or A2 to print images. I have been asked to print an image that is 18079 x 2095 pixels as big as possible.
The purpose of the image is as a background to a model railway setup in a man cave. The image itself was taken using...