palombian's latest activity

Before buying a new print head, try cleaning the timing strip, that might reset the B200 error..

Thanks Mr Hat, I think you're probably correct. I'm going to try and take the side off the case and cut open the inner case to reveal...

Thanks for the tips. I was tempted to order a starter kit from Octoink with an extra set of cartridges, but I think I'm going to stick...

I needed to replace the print head in my Pro-10 a little over a year ago. After scouring the interweb, I discovered that Canon Canada...

When refilling don’t purge the carts first, the inks will mix with no issues, and the dribble refilling method is slower but cleaner and...

I had a print count of over 52,000 on my faithful ip4500 using one head on I.S. inks, and as you say it eventually lost the magenta...

Since I refill with genuine Canon ink, I haven't encountered many problems. However, every printhead will fail sooner or later—fingers...

Canon printheads are a consumable item and fail after some time of usage, please read the attached description which explains the...

This is certainly so for the consumer dye printers. But in the photo printers the PRO-9500 (pigment) had a rather short living...

Damaged Canon print heads can never be repaired, once nozzles are burned out they will never come back, its less costly for the...

If you don’t have a P700/P900 printer, you might want to skip this post. I've been testing the print output from the P900 to better...

Thank you. Have ordered the service tool (v5204). But... the replacement 2nd-hand MB2140 packed up this morning with an error...

My MB5150 is my second too. The first one is kept in stock, I guess with what I know now I can revive it. Have a spare printhead also...

If the counter was reset by the repair shop their tool worked and the printer is not blocked.

Don't panic. Get the chips right as @The Hat suggested and reinsert all carts. Clean the contacts (of the chips and where they connect...