Lothman's latest activity
-
LLothman reacted to Ink stained Fingers's post in the thread You don't need much patches to create a good printer profile with
Like.
@pharmasist - it works - I printed your 192 patchsheet on a 10x15 cm card and scanned it with the i1io2 robot - it works !!! - that was... -
LLothman reacted to Ink stained Fingers's post in the thread You don't need much patches to create a good printer profile with Like.
You may try to compare prints done either with an ArgyllCMS profile or an i1Profiler or ColorMunki or .... profile generator, but be...
-
LLothman reacted to Ink stained Fingers's post in the thread You don't need much patches to create a good printer profile with Like.
I did another test and compared a print done with a profile with 165 color patches vs. a print with a profile with 2880 patches, printed...
-
LLothman reacted to pharmacist's post in the thread You don't need much patches to create a good printer profile with Like.
Many thanks for the comparison: Actually the Spyderprint High Quality target with only 225 patches seems to produce already very good...
-
LLothman reacted to Ink stained Fingers's post in the thread You don't need much patches to create a good printer profile with Like.
the test with a 096 patch profile delivered a deltaE of 1.4 vs. the high patch count - 2880 profile which is slightly wider than the...
-
LLothman reacted to pharmacist's post in the thread You don't need much patches to create a good printer profile with Like.
Inspired by @Ink stained Fingers I generated a small 165 patch target that can be printed on a small 10x15 cm/4x6 inch photo card and...
-
LLothman reacted to Ink stained Fingers's post in the thread How many color patches are needed for a (good) profile ? with Like.
I made another test to compare profiles with based on different patch sheet counts and the impact onto actual prints. I did this - - I...
-
LLothman reacted to pharmacist's post in the thread How many color patches are needed for a (good) profile ? with Like.
I think the Colormunki/i1Studio/Calibrite method using the 50 + 50 patch method is actually based on these findings. The difference is...
-
LLothman reacted to pharmacist's post in the thread Converting Spyderprint 225 patch target to i1Profiler with Like.
@crenedecotret : I have made an i1Profiler target that is based on the high quality target + grays of Spyderprint, that originally was...
-
LLothman reacted to thebestcpu's post in the thread Star Chart Resolution Tests of the Epson P900 with Like.
Note: I just added the PPI vs. Circle diameter table that somehow did not transfer over with the initial post I ran resolution tests...