Lothman's latest activity

I think the problem is caused by using a wrong type of transparency sheet. They come in two varieties, for laser printers and for inkjet...

does the nozzle check change after 24h? If so it could be air bubbles in the inks supply or inside the printhead. On my p900 I had no...

I think Lothman on this forum uses Pigmera GX. I made profiles for him some time ago and I was really impressed by the blackness of...

hehe, I think I agree with everything pharmacist said :weee. I bought a used p900 and compared the Farbenwerk Pigmera prints to the OEM...

Please upload the generated *.ti3 file, so we can look at it and I can regenerate the profile and look for some crulpits in it. The 480...

I have found the cause of my problem: The profile I made was done with the print setting: Epson Premium Glossy, print quality: quality...

Yes sure the resolution changes output result, how else you get better print quality. But its very hard to explain this to a client...

I got a LED video light panel with high CRI LED from Dracast, I hope that will do the job.

I was hoping for a ready to buy desktop lamp.

Hi all, can anybody recommend a desktop light source in order to judge prints made late at night ;-) May be a LED solution with light...

After my recently purchased i1 Pro 2 device, I made this 648 patch target to be printed on a single sheet of A4 (210x297 mm). Optimized...

my GX6050 is gravity siphoned. After a year I had several times problems with air in the tubes, needing a deep flushing cycle. But I was...

up to A3 you get the Brilliant Supreme matte (230g, can be printed doublesided) from Calumet...

you should choose in the left: B/W print to have the 50 + 2x 50 patch method (with neutralisation method). NOT the Color print method

When you print patch sheets to create a icc-profile you are supposed to let the prints dry for a while - but how much ? There are...