Recent content by Le Wins

Yes, it is. I am not sure either, but I got this kind of error reports 2 years before, back when I bought this unit and the first time tried to find some working drivers. For me it tells that the actual driver is not compatible, it’s looks like the printer unit and the driver do not speak the...

Yes, it seems you are right. The universal driver handled the common prints but not the atypicals. The installation went well, even printed on the 305x457 paper. The problem was it printed out a load of baloney. See the picture. Well, the name of the printers which the driver contained was...

It works! It was a driver problem after all. But the solution is kind a… counterintuitive. As I said I tried a lot of drivers before. If the driver was an installation executable I ran it as administrator, if it was just the driver file package with the .INF file I tried it by adding a network...

This is an old used/refurbished printer which I got 1-2 years ago. They took it out of order because it developed a printing issue, which we managed to resolve. I paid for it 20 euros :D I actually don’t know if this issue was present from the beginning, the first owner never mentioned it (I...

Actually that drop down menu for Paper Size which you marked is the option where I set the 305x457 size paper, so it is set to 305x457 but it just keeps named it as Custom Size.

Probably I just seeing the 1000mm option since I using a generic driver rather than the one specific to your model, but it does not print on 457x305 either. I tried the driver from the official site too. It didn’t work on W 7 and 8.1. I also tried to install the basic printer installation .INF...

I got an another issue. Here is the post

Hi guys! So, this beasty of my, has a new issue: It refuses to print out anything bigger than A3. According to the description it should be capable to print at least on Arch B size 473x305mm or 305x1000mm with the side feeder according the driver popup window. The print job is sent from the...

I got the solution. I got a little time again to resolve this problem. It was a misfeed after all. It was a piece a paper in a teeny-weeny creek below a part what I even I didn’t know that exists. I was searching for the mentioned sensors… Just any kind of sensor to see how they look like. I...

I removed more panels/covers to look deeper inside. It revealed the cogs/gears where the noise coming from. It seems that one cog slips over the other. This does not happen all the time, in half of the cases its catches the other cog and turns them but it doesn’t matter because the misdeed error...

Hi guys! Some weeks after we successfully resolved the previous problem with my printer (Bizhub C350) I got another one. Recently when I printed from feeder Bypass take-up on A4 paper I got a misfeed error. There is also a creaking noise every time I turn it on and the error won’t go away...

Thank you! Actually it is (almost) completely resolved! Check out the topic

You gonna… smear your… underwear! (or make a facepalm) Because I found the problem and also the solution! I was searching for parts for imaging units to order one set to sort out the possible problem. I made a list but before the order I decided to make every possible maintenance what is...

an additional thing I was not convinced about interchangeability between the drums of the different colors so I tried it out. The dimensions are the same so I changed the yellow drum with the black and in the end it still works. And it seems that it has no effects on the quality of the prints...

Yeah I get it. That is the reason why I want to narrow down the possible cause. If it a replaceable thing, well hurray! Getting a new part can make it a full all-purpose printer for our home (it is not intended to be a business printer, I forgot to say that) If it is a part which affects from...