Recent content by Josh87

Here is a picture of a color sample page. The M, PM, Red all have banding as you can see. the other colors look fine. Sorry for the quality http://www.nifty-stuff.com/img/files/Print_check3.JPG

hpnetserver, Thanks for the advise. i tried blowing through the top vent on the cart to get some ove the ink out. But it really didnt seem to make any difference with the print quality. Would soaking the print head in windex help disolve a clog? Also i want to try to use an...

Ok i just reinstalled the print head and ran a nozzle check and it seemed ok. Dave from hobbicolors ink sent me a page that had BK, P, PC, Y, M, PC, Green, Red. The PM and the M have banding on them and a little on the Red. The banding is like the color is missing faintly not from any other...

Just a question, I assume that i have to make sure there is no water on the print head when i insert it back into the printer but do i have to wait a certain amount of time to replace the print head after soaking

Mikling, Thanks for the reply. This was the first refill for most of the carts. I had been replacing them as they were used up. I do belive that i did notice that the M cart sponge was pushed up slitley at the exit port. but it was maybe a 1/16 space and was only on one side of...

I bought the hobbicolors kit from dave and i finally installed it. It didn't do it right off but now i have this problem with photos showing courseness and banding. I've done multiple nozzle checks and head cleanings but with no result. I emailed dave and he came to the conclusion that my...