Recent content by Jannis

I soaked it over night in soapy tap water and flushed it really good under the tap and then put it in destilled water. Then I put it on wet microfiber and I noticed that slightly pushing on it makes water bubbles appear on the part that connects to the cartridges (the ceramic sponge) and all...

So I am back and the results look pretty good. I only made one tespage. Here is a scan (with humble quality). The PC PM and PBK are the only old cartridges but I might swap them too. I don't know (let me know) how I can pay you back for all the advices!

Alright then I might have soaked a bit too shy. I only submerged the nozzles because I didn't want to submerge the PCB. The quality of the photos is from my smartphone and I think that its post processing is bad for documents (also there is dust on the sensor). I can scan it but my scanner was...

Well I have inserted new cartridges now and it got better again the only color missing is Yellow. Cyan has a small line in it. I have used the normal cleaning. I think I wait like a day for the new cartridge to wet everything before I unplug the printhead again to clean it if it still doesn't...

I soaked the print head over night and cleaned it with papertowels until they appeared very clean. There was a LOT of ink smeared at the print head. So It prints a little better. So directly after the cleaning it put out some yellow but then it disappeared again, the printer does not say the...

Thank you very much for the advice. All cartridges are original and not refilled.

Alright I am back. I resorted to the print head being burnt out (maybe with some imagination I can see slight burn marks on it). I went and bought a 'new' pro9500 and got one for 37€ with all accessories and 5 extra cartridges. But it currently does not print. I want to ask now how I can...

They weigh a lot though :D. Well I will think of a solution and post any results.

Alright. So can I try to buy new cartridges and test if that works or should I really buy a new 9500 printer? I am afraight that there are no pro 9500 around and it would be cheaper to buy a new head.

Ok I took out the print head and it seems to work normally as it displays the error that the printhead is missing. The printhead sled is moving again. But if I put back the printhead without cartridges it prompts the same error and it stops moving. There is no blink code at the startup it just...

Hello, my printer worked and then I accidentially sent 2 print jobs at once and now the blue and orange led flash alternating together with the error mesage 9200 but grayed buttons for canceling the print job. The printer is not doing anything anymore, the printhead does not move and the...