Recent content by InkaInkaDoo

  1. InkaInkaDoo

    Chip Resetter Primer

    I am shopping around for a chip resetter that works with both my Epson 3800 and P800. I saw Jose R's video on the QE 589 in which he resets a used-up maintenance cart from 0% to 100%. After removing the empty tank, he inserts a new/empty tank. I wonder if the printer registers the serial number...
  2. InkaInkaDoo

    Chip Resetter Primer

    OK, the chip resetter works! Not quite the way I thought it would, though. The chip resetter appears to reset empty (fully used) maintenance cartridges. The LED flashes red a few times, turns solid green for a few seconds, then turns off, but my printer will not accept them. Doing a little...
  3. InkaInkaDoo

    Chip Resetter Primer

    Well, I'm appropriately skeptical about the chip resetter, but I'll be sure to verify whether or not it works when I get it.
  4. InkaInkaDoo

    Chip Resetter Primer

    I think they're both wearing masks, so they should be OK... :)
  5. InkaInkaDoo

    Chip Resetter Primer

    InkOwl's resetter description states: Maintenance Tank Chip Resetter for EPSON Stylus Pro 3800, 3880, SureColor P800 It is also a "QE 589" resetter, like the one I ordered on Amazon. Also, in Jose's video for the 3880, he is working with the same maint cart as mine, T582 & according to...
  6. InkaInkaDoo

    Chip Resetter Primer

    The cleanings are initiated manually. Four of the cartridges are used for white ink, which is a bit finicky & requires the head cleanings. I also pull 5mls of ink from the waste ink tube using a syringe at each head cleaning. I don't know how much ink is dispensed in a heavy head clean, but I...
  7. InkaInkaDoo

    Chip Resetter Primer

    I installed my last waste cartridge in February, but I've only printed a few shirts since then. Most of the ink has probably be used in twice weekly heavy head cleanings.
  8. InkaInkaDoo

    Chip Resetter Primer

    I keep looking at all the 7 pin resetters out there and wishful thinking has me thinking they should work for my maintenance cartridge. I'm sure I could go through a few hundred dollars of resetters that won't work for me.
  9. InkaInkaDoo

    Chip Resetter Primer

    I'm hoping to hear from both Jose & mikling, who apparently sells resetters, via this thread. I saw the InkOwl offering. It seems a bit overpriced at $40. My printer came with an extra WIC, I've "used up" both of those and I just purchased a new one, so now I have three. Urrk. If I can't find...
  10. InkaInkaDoo

    Chip Resetter Primer

    My printer was modified for Direct to Garment printing and I am able to refill the ink cartridges easily enough, although the sometimes throws an error on 1 or 2 cartridges, but that can be remedied by removing the cartridges and reinserting them. My main problem is the waste ink cartridge. My...
  11. InkaInkaDoo

    Chip Resetter Primer

    Hi, all- Chip Resetters are a big, mysterious, gray area for me and I am hoping you will all gladly regurgitate your knowledge into this “printing chicklet’s” mouth (an analogy so disgusting it has me regurgitating a little.) To provide a little context, I have an Epson P800 printer and I...
  12. InkaInkaDoo

    Howdy Do!

    Hi, everyone- I have an Epson P800 based Direct to Garment printer and I have needs! So, I'm really glad I found this forum and I'm really hoping to find the answers I need from the brain trust at PK.com.
Top