Epatcola's latest activity

Thanks for sharing. I don't know if you followed older threads, but, I have posted that as far as I can see for the ET-8550 all glossy...

I made a bat file to process a dropped CSV file into an ICC profile. Make sure you edit the first few lines of the bat to indicate where...

I just inspected the profiles. The only measurement set I have is from a 728 patch pain paper target so not worth printing anything with...

It still seems he and people who have bought the tool are the only ones to have seen a profile generated by it.

The hole in the CR30 is 4.2mm so 8mm patches allow only about 2mm of misalignment. I think you did well to measure 10mm patches without...

Long time listener, first time caller. I tweaked the batch files in Epatcola's AWK scripts to generate 10mm patches using -a1.25 and set...

The scanner must have been seeing more of its own light. Maybe Kodachrome is more reflective or your set up was different. You could...

The scanner has a monochrome sensor and switched R, G, and B LED illumination to detect colors. You are only going to get monochrome...

The thing isn't much money and he can't really offer a demo which people could use to produce all the profiles they need. I still...

That also means it only happens on matt papers. With VFA media type the speed is half that of standard matt and I assume it puts down...

You are welcome. Having never used blender I couldn't offer advice on how to do it. I did it in a CAD program. It could also be done...

Just the bottom part reduced to 49mm outside diameter?

Another old thread from DPreview also this and this brought back into the light by Keith Cooper with this youtube video. The claim...

Most people are supposed to make do with manufacturer or 3rd party created print profiles. Profiles not created with their specific...

The location of the breathable film in the tank and instructions to check if ink ever reached it and to replace the tank if it did is in...