Recent content by bobglen97

While avery is not the least expensive option, I can vouch from personal experience that they are extremely helpful. I had a problem with some sheet protectors, sent the President and CEO a note with samples, and they replaced the complete box. The letter with the replacement was from the...

http://members.cox.net/bobchart97/blktst.jpg try printing that test image using the plain paper settings, try it at draft, good and custom. Also, if the 865 has the option to clean the black head only, try cleaning (not deep cleaning) the black head 4-5 times...4-5 min apart. see if that...

http://members.cox.net/bobchart97/550print.gif The above link is to a snapshot of the relevant portion of the quickstart guide that I uploaded to one of my sites.

Let me add a few thoughts to this. Standardize on the mfg of cd/dvd you want to print on. Do the same for labels and plain paper. I would suggest that as far as plain paper is concerned, a 24lb 98+ bright white will work best.....(this is usually a "premium" plain paper). The canon software...

http://www.ojipaper.co.jp/news/english/cgi-bin/news_view.pl5?article=20050704_001 That is the official press release....Oji is a well diversified paper products company that does evrything from timber farming to cardboard boxes to disposable diapers to thermal papers. It appears that they...

The cost for having negatives and slides professionally scanned is about $1.00- 1.50 for a 4000 dpi scan. Cheaper for less resolution....So if you really have a lot that need to be scanned, then the $450 scanner is a must, as you will save so much time (little or no noise from dust etc. in the...

Questions for you Printer mafg/model/ink/paper? allowed dry time before framing? framed with mat? framed indoors/outdoors? Temp/humidity delta between indoor/outdoor?

Good explination of the stepper motor and encoder. Back in 1984/85 HP marketed a Canon engined bubblejet printer (HP laser printers were all powered by Canon engines) for graphic screen dumps on the 900 series engineering workstations. Only was available with an HPIB interface (16/32 bit...

There is a Major retailer here in town that has posted rated duty volumes for printers where they are displayed. For the IP4000 the display sign said the rated MONTHLY duty cycle for this printer was 5000 pages/month. All other printers were similarly "over-rated". I spoke with them and they...

I have run cold water completely over the surface of this paper, (48 hours after it was printed using media street inks) and there was no bleeding, running or redustion in detail, but there was a noticable dulling of the gloss finish. I did not blot, just leaned it up at an angle to dry.

Ilford classic pearl works very well with canon printers....B&H and adorama has it reasonably priced...

The bci-3 and -6 are physically the same cart......the reason for the color designation (at Media street, where I buy my carts) is that they send send a "color strip" you can place on the cart Bob

Try reading this thread from another forum: http://forums.dpreview.com/forums/read.asp?forum=1003&message=9538339 Bob

I ordered 2 i960's from this individual $69.00/ea....no rebate ...they are due to arrive on the 14th....shipped the same day, with ups tracking numbers....will advise further after reciept of merchandise.....btw, I will be selling the factory oem carts that come with the printers. Bob...

They are the same printhead....see link below Bob http://www.weink.com/ecom/catalog/genuine_canon_brand_replacement_0035_printhead_4016728.htm