Artur5's latest activity

  • A
    Artur5 reacted to palombian's post in the thread Magenta Banding Pro 10s with Like Like.
    From own experience I agree with @Artur5. Buy a PFI-106M cart (130ml) to refill. PFI-1000M (80ml) would do also (no experience). Not...
  • A
    Artur5 replied to the thread i 9950 ink starvation.
    Nice to hear that you have a brand new spare printhead. A wise move to get it when they were still available. 😃 Anyway if those BCI6...
  • A
    Artur5 replied to the thread i 9950 ink starvation.
    Knowing Canon, I’d guessed beforehand that they discontinued the BCI6 inks years ago. It’s a surprise that they’re still manufacturing...
  • A
    Artur5 replied to the thread Magenta Banding Pro 10s.
    I’ve had my Pro 10 for seven years. After Canon’s original cartridges that came with the printer were empty I started to refill them...
  • A
    Artur5 replied to the thread Magenta Banding Pro 10s.
    I don't think it's a problem with the contacts. For one thing, it's very strange that only magenta has issues. There’re about 80...
  • A
    Artur5 replied to the thread Magenta Banding Pro 10s.
    If a brand new OEM cart gives the same results, then the problem isn't faulty ink or a damaged cart. It must be the printhead...
  • A
    Artur5 replied to the thread Magenta Banding Pro 10s.
    Ink starvation is more usual with sponge based carts, but the Pro10 cartridges have no proper sponge, only a thin felt pad at the ink...
  • A
    Artur5 replied to the thread Magenta Banding Pro 10s.
    For what I can see, there's no visible problem on this test. but I reckon that this photo isn't good enough for my ailing eyesight to...
  • A
    Artur5 replied to the thread High Temp PLA - Polymaker HT-PLA.
    I’m not saying anything against this particular filament, because I haven’t tried it, but in the past I had negative experiences with...
  • A
    Artur5 replied to the thread buying advise 3D printer.
    My first printer was a Prusa, still on good working order, but I won’t recommend any of their current models, The reasons aren’t easy to...
  • A
    Artur5 replied to the thread buying advise 3D printer.
    WARNING : You're about to open a deadly can of worms. Think twice (or thrice ) before entering into the 3Dworld, a land of no return...
  • A
    Artur5 replied to the thread Plugs for Pro1000 carts.
    Yes and usually free shipping for orders above 10 euro/USD or around two bucks if the articles cost less than 10. 5/32" =3.97mm...
  • A
    That nozzle check is probably recoverable with good management. Try to view with a loupe or by scanning with high resolution to see the...
  • A
    When a Canon printhead begins to fail the printer often shows an error code 1403 that can mean the printhead is overheating. This makes...
  • A
    Artur5 reacted to The Hat's post in the thread Canon Pro-10 Nozzle Clogged or Damaged? with Like Like.
    The carts are very easy to flush, but you need a special modified clip, that way you can rinse the cart with Window cleaner using a...
Top