Recent content by Artefil

Done, without help.

I'm having a problem with the gear used for paper advance. Is anyone of you able to help putting it back in place.

8 times flashing is described here : https://support.usa.canon.com/kb/s/article/ART176497 You're right it means the absorber is almost full. It's a maintenance warning. You must : 1- dismantle the printer in order to replace or renew your waste ink pad 2- Use the appropriate Service Tool to...

After removing the fuser from an HP M452 (HP M477, M377 are the same) for a paper jam after HP cleaning method, I noticed that the fuser film is quite dirty. I've ordered pressure roller but not suppose to order the fuser film too. So I give a try cleaning the film with isopropyl alcohol...

Great ! Now it will be an easy game to play, . Many thanks

I met Brother french technical director (during IT partners in Paris La Défense) three weeks ago, but I wasn't able to provide any help.

Hello, I'm looking for the flat panel of this printer. Unfortunately I don't have the PN, not found in the part list. I bought the touchscreen part, but unable to find the flat panel. It should be a 3,5" color touchscreen LCD, but when disassembling there is no reference at all, not even the...

I found a solution for replacing the pads with this : https://thefeltstore.eu/fr/products/plaque-de-feutre-epaisseur-10mm-nf285-soft-0-20-kg-cdm?variant=44987672527131 Have done test, it works great.

Hello, Great idea, actually I've one to fix coming from HP MFP M452. The pressure roller is available mainly from China, but I'm wondering how I can use these PTFE plastic tube. Do you just put it on the tube ? Won't it slip ? Must I make the film and the pressure roller become one ? How...

Service Tool V4718 is for 3600 series, but for MG3650S the appropriate ST is V5103

I never insult anyone, please respect me, it will prove that at least you are able to discuss as a civilized being. But I'm not sure you can

And what about this one is it also a troll ? https://cartridgeworldusa.com/blog/should-you-keep-your-printer-on-or-off/

A printer in waiting mode is 1Wh, considering the french price of 0,30€ /KWh. You would pay 2,70€ for a year in waiting mode (leaving your printer ON), just wondering how much more the ink will cost you.

Sorry but just have a look at this quite old CANON reply : "The amount of ink being used does seem excessive, however, I must advise you that your printer will perform a clean every time it is turned on and off and will use ink for this process"...

Great, Many thanks, will see tomorrow evening if the printer will turn on without printhead or not. Do you think that it will also work out of the box. Is it possible to simulate the presence of functionalities by connecting false loads example something that will simulte the printhead existence ?