AmaDeuSbg's latest activity

Update 2: Tested hair spray today both on the glossy paper and silk paper. Also did a coat test on canvas. I found an already semi...

I followed all your tests and although you several times mentioned that the paper is a really important factor for fading and ink...

Le me update the upper table after another year - the complete fading of patchsheets after 2 years. It is interesting to see that...

Not a problem at all, I've been doing sublimations for like 10 years and I know the struggle. If dampers (cartridges) are half full and...

P.S: The cartridges should not be full full, there should be half of the cartridge full of air (about 50% full is OK), left should be...

No problem, hope the printer is revived in the end. Even if cleaning solution is left in the nozzles it is no problem, the ink will push...

Hey, Most likely due to the inactivity the ink in the dampers went back to the reservoirs and the ink lines and dampers are full of...

I am writing with an update. I found the product code of the A2 platinum paper in the pack and it appears they are exactly the same as...

Well I am using the original inks that came with the printer, not refills but consider changing to inktec pigment ink if there will be...

@oliver666 This is sad to hear but at least good to know I do not imagine this. Did you find any other solution other than using...

Thank you @thebestcpu , I also saw the office1 but since I did not see the exact same paper in my plotter page I passed it by...

Hi @AmaDeuSbg There is no question that pigment ink has a larger propensity to sit on top of glossy papers, which can create issues...

I cannot speak to what to expect with the katana papers. It seems unusual to be that scratch sensitive and comparing to a Canon paper...

Give hairspray a try - as a test - just use the regular one not the strong stuff which is weatherresistant etc. You should test various...

Thank you both @thebestcpu and @Ink stained Fingers I am located in Bulgaria and sadly all the cut papers I found (there were just 2-3...