Recent content by ali_911

Hello Everyone. Hope you all keeping well and busy. I just like to give you an update on my previous problem. As you all know I spent a lot of time and numbers of methods for missing black nozzle. I finally could unblock the printer head by using alcohol, warm water and windex mix. I've...

I didnt use alcohol option because of trusting your experience. But ı worked so much on it and want to leave it for a while before I use water & ammonia mix.

Update; Black nozzle is still missing but, the lines appears less when I use high quality of printing option. I'll leave it for a while to see if it goes itself. If not, then I'll use ammonia & water mix. Thank you everyone for your help.

Hello Sir. Many thanks for your kind help and support. I tried your push & pull way and pressed cleaning liquid on to the head. You'll see the left check I had before and the middle one after. The one on the right hand side is after 1 head cleaning. There seem no different after the action...

Yes i print everyday but, weekends and may be 1 or two days of not printing. Thats when the place gets very hot like 40degrees. I didnt get you well when you said about the damper. I will try the push & pull, leave the liquid there for about 1 hour and see if the missing nozzle gone or change...

Thank you. I'll try push and pull. I can tell that i dont really need much preasure as it goes very smoothly. I had this for few times before but 1 head cleaning was good enough. This time it took longer. Btw i connected a hose to waste tank hose to keep the printer pads clean. I did this when i...

Hello, Thank you for your reply. No i didnt pull the ink back. I put towel under the head, pushed the head cleaning but didnt pull back. Missing nozzle never got changed. Only the black one and same line, same pozition. Doesnt move around.

Hello everyone, Im new to the forum and want to thank you everyone out there of their help in advance. I have Epson L1800 and always been using original inks since I bought like 2 years ago. I use the printer almost every day. Im have missing black nozzle problem since last week. I tried...