Where to buy Canon Pro-100 carts?

MikeH

Getting Fingers Dirty
Joined
Dec 24, 2004
Messages
20
Reaction score
15
Points
36
Location
Bullhead City, Arizona
Printer Model
Pro100
I know you may think I'm crazy... I've probably purchased 5 or 6 or 7 gallons of a variety of refill inks for my Canons, going back to my BJC210 in the late 1990's (?).

But, (and thanks to you posters here), I purchased a Pro-100 from B&H on one of their $250 deals. However, I print very little... I do "4x5" photography so my TIFF files are quite large, but I don't sell any of it. I've had the Pro-100 in operation for maybe 9 months now, and am only now getting my 1st "low ink" warning on one of the greys... So, it seems easier for me to buy the 8 cart OEM pack, which B&H (and others) are selling for $125 and not go through the effort to re-fill... I might change my mind later.

Does anyone have a recommended place to buy the carts? $125 seems like the lowest. Thanks.
 

Tin Ho

Print Addict
Joined
Apr 24, 2006
Messages
866
Reaction score
26
Points
163
Have you checked ebay? There are people selling new Pro-100 for $130 - $150. Some of the sellers actually take the print head out and sell them for $120. They sell the unused set of OEM carts cheaply too. By parting out and selling them separately they get more money than selling the printer as a whole.

Don't know what they will do with the new printer without print head nor ink. I picked one up for $10. It is only taking up space in my house though.
 

stratman

Printer VIP
Platinum Printer Member
Joined
Apr 19, 2007
Messages
8,712
Reaction score
7,175
Points
393
Location
USA
Printer Model
Canon MB5120, Pencil
Buy another discounted Pro 100 from B&HPhoto or Adorama and keep or sell the print head and the printer body.
 

Drjim

Fan of Printing
Joined
Aug 29, 2017
Messages
53
Reaction score
25
Points
58
Location
Gaithersburg Md
Printer Model
Cannon ts9020 pro100
The "body" is the zombie home of your next pro100 when your print head dies or the waste tank fills up.
 

kdsdata

Printer Guru
Joined
Feb 28, 2017
Messages
161
Reaction score
144
Points
148
Location
Calgary, AB Canada
Printer Model
Pro-100 & Brother-L8900
Hello @MikeH:
I have purchased 2 set used OEM CLI-42 carts very successfully from OctoInkjet. Way less than the $100-$125 you see on eBay. But they are not always in stock, so keep checking their website, that's what I did for my second set.

I then flushed, dried, and refilled them without problems. They are working fine. My second set is now on the shelf, waiting for it's "tour of duty". I also purchase OctoInkjet inks.

My caveat emptor, if you buy their (OctoInkjet) inks also, don't mix with other inks. They may work, they may (quite possibly) not work. For various reasons. Be it incompatibility (gel issue), or tone variations, etc. It's just not worth any potential problems, especially considering the "yellow" gel issue. If you want to convert to some other ink, spend the time, clean and dry your carts. It's not really hard once you investigate all the good videos (such as Jose Rodriguez) that are on youtube. I am satisfied I did.
 
Top