Well it is about time Canon woke up

The Hat

Printer VIP
Platinum Printer Member
Joined
Jan 18, 2010
Messages
15,787
Reaction score
8,818
Points
453
Location
Residing in Wicklow Ireland
Printer Model
Canon/3D, CR-10, CR-10S, KP-3
PeterBJ said:
Druckerchannel.de also has some news about the new A2 Canon Pro-1000 here or in English here.
druckerchannel.de said:
Integrated densitometer
Canon installed in his device equipped with an integrated spectrometer for color calibration. However, this is not for the creation of ICM profiles for a neutral reproduction, but merely compensate for tolerances in the production or altered pressure behavior due to wear.

This feature thus serves only to set the desired by the manufacturer calibration state, which then serves as the basis for its own calibration or using the built-in driver ICM profiles.

I wonder will this densitometer work with 3rd party inks and just ignore them or prevent their use completely, because these things can be pretty tricky to fool if they are firmware set to very small colour margins..:idunno
 

Roy Sletcher

Indolent contrarian
Platinum Printer Member
Joined
Dec 20, 2010
Messages
978
Reaction score
1,007
Points
233
Location
Ottawa, CANADA
Printer Model
Canon Pro-100, and Epson 3880
I wonder will this densitometer work with 3rd party inks and just ignore them or prevent their use completely, because these things can be pretty tricky to fool if they are firmware set to very small colour margins..:idunno

Sounds like the usual marketing jargon to make you think you are getting more than they are delivering.

Like politics speak (from the word poli = many, and tic = a blood sucking insect) clarity is not the objective. :mad:

rs
 
Top