Probably the xxx-th one asking this, but can't make up my mind to go for inkjet or color laser.
Need a new printer to print lots of manuals, has to do duples (booklet) printing.
(Double sided, 2 pages/side so it can be folded into a booklet)
Printer itself doesn't have to support booklet printing, software will fix that.
Running cost has to be low, so has to be refill frienldy.
Booklet printing means text can get pretty small.
Doubting between color laser or an inkjet.
If an inkjet could do an almost laser like print quality on that, might go for it.
Would prefer an all in one A3+ with duplex printing, cd printing if possible.
Woule like an A3+ for printing of schematics, can come in handy, but not really necessary.
Duplex on A4 only is ok, if also on A3+ possible is an extra plus.
If for the duplex booklet printing the only suitable would be a laser was thinking on Kyocera as it doesn't need replacement parts every 10-20000 pages.
Thinking about the Kyocera KYOCERA FS-C5150DN, as it doesn't use a chip on it's toners?
Or maybe the KYOCERA FS-C5350DN for the larger toner capacity.
But needs a chip reset or replacement every time it's refilled?
Anyone experience with kyocera and refilling Kyocera color lasers?
If someone has better suggestions?
All tips/info welcome.
Thanks in advance.
Need a new printer to print lots of manuals, has to do duples (booklet) printing.
(Double sided, 2 pages/side so it can be folded into a booklet)
Printer itself doesn't have to support booklet printing, software will fix that.
Running cost has to be low, so has to be refill frienldy.
Booklet printing means text can get pretty small.
Doubting between color laser or an inkjet.
If an inkjet could do an almost laser like print quality on that, might go for it.
Would prefer an all in one A3+ with duplex printing, cd printing if possible.
Woule like an A3+ for printing of schematics, can come in handy, but not really necessary.
Duplex on A4 only is ok, if also on A3+ possible is an extra plus.
If for the duplex booklet printing the only suitable would be a laser was thinking on Kyocera as it doesn't need replacement parts every 10-20000 pages.
Thinking about the Kyocera KYOCERA FS-C5150DN, as it doesn't use a chip on it's toners?
Or maybe the KYOCERA FS-C5350DN for the larger toner capacity.
But needs a chip reset or replacement every time it's refilled?
Anyone experience with kyocera and refilling Kyocera color lasers?
If someone has better suggestions?
All tips/info welcome.
Thanks in advance.