MX870 print qualitty problems?

Parhs

Getting Fingers Dirty
Joined
Aug 19, 2010
Messages
62
Reaction score
0
Points
29
Hello..
I reffiled MX870 using octoink inks...
I had no clogging problems only black got clogged when ran nozzle check but fixed with a simple head cleaning.. I think that something might be wrong with this color as it was recieved unsealed...
I noticed that if i dont print anything for 2-3 days i have clogging at black only. But latest nozzles checks are 100% fine...
The problem is that when i print in typical quality i get strange lines not empty! Like unaligned... But i aligned it automatically and manually..
Here is a picture to show the problem..
Like to the image..Check middle-bottom right
I printed a black page also and same problem occured..

What should i do for this...

I believe that this behaviour applied with original inks also..
 

panos

Print Addict
Joined
Apr 14, 2005
Messages
623
Reaction score
18
Points
166
Location
Greece
The nozzle check runs fine and you have aligned both automatically and manually and the problem persists, right ?

Do these lines start from the beginning of the photo or they start appearing in the middle of it ?

Are you certain the problem started after you refilled ? Is it possible that you only noticed it then ?

Did you try other quality settings ?
 

Parhs

Getting Fingers Dirty
Joined
Aug 19, 2010
Messages
62
Reaction score
0
Points
29
I think that the problem started before refilling... I am aligning again the printer now.I found some errors comparing to saved alignment settings...
The photo was printed in typical quality .High quality prints without problems....
Το έχεις και εσυ το μηχάνημα;
 

stratman

Printer VIP
Platinum Printer Member
Joined
Apr 19, 2007
Messages
8,712
Reaction score
7,173
Points
393
Location
USA
Printer Model
Canon MB5120, Pencil
Parhs said:
Το έχεις και εσυ το μηχάνημα;
Huh?
 

panos

Print Addict
Joined
Apr 14, 2005
Messages
623
Reaction score
18
Points
166
Location
Greece
Yes, stratman is correct. This is a US-based forum and writing in non English will prevent other members from contributing.

Photos printed in normal quality may exhibit this problem, nothing to worry about. Just make sure that print heads are correctly aligned.
 

stratman

Printer VIP
Platinum Printer Member
Joined
Apr 19, 2007
Messages
8,712
Reaction score
7,173
Points
393
Location
USA
Printer Model
Canon MB5120, Pencil
Panos -

I was curious. I thought it might be a proverb or common saying but Google Translate left me more confused: "The NHS and have the machine".

Ultimately, it was all Greek to me. ;-)
 

Parhs

Getting Fingers Dirty
Joined
Aug 19, 2010
Messages
62
Reaction score
0
Points
29
It means, do you also have this machine?
 

Redbrickman

Printer Master
Joined
Dec 27, 2010
Messages
1,107
Reaction score
1,190
Points
293
Location
UK
Printer Model
MB5150
Don't mention the NHS, it gets a lot of bad press ;)

AKA in UK as National Health Service.
 

stratman

Printer VIP
Platinum Printer Member
Joined
Apr 19, 2007
Messages
8,712
Reaction score
7,173
Points
393
Location
USA
Printer Model
Canon MB5120, Pencil
Parhs said:
It means, do you also have this machine?
Thanks Parhs. I guess it was "Greek" to Google Translate as well. :D

(English saying - "It's all Greek to me" = I don't know what it means.)

Well wishes to our Greek cousins during these difficult economic times.


Redbrickman:

I read that the British NHS is starting to change its ways and loosen its reins of control. Evidently, the new mousetrap is not better than the old mousetrap. What's old is new again. Vive le pass!
 

Parhs

Getting Fingers Dirty
Joined
Aug 19, 2010
Messages
62
Reaction score
0
Points
29
These problems occur still at normal quality but i cant do anything for this.....

google translate sucks , some guys here use it to translate text for essays without even checking whether it makes sense.(It drives professors mad).
Thank you for your wishes but things arent that bad here. Many people still have a lot of money..I know 3 men that have collected 500.000+ euros and just have them...
Few people have a real problem due to economic crisis but many are afraid..
 
Top