Epson Artisan 810 with a ciss.
Black started printing spotty, so I ran a nozzle check and the Black only is showing up with broken bands on the paper.
Tried a few head cleans and the bands more around but are pretty much still there.
Pulled the print head off and soaked it in a nice solution of very warm windex. Put everything back together and still the exact same results. All colors check good but the black is still missing bands ( Or lines, whatever you want to call them )
On other printers I've had I've been very successful in pushing a very warm solution of windex through the print head through the spikes.
However, no matter what I try I cannot get any color to take any cleaning solution.
What other options am I left with here to really get this thing clean and back running again.
For the nozzle check I'd say I'm missing about 25% of the bands or lines or whatever you want to call 'em
Thanks.
Black started printing spotty, so I ran a nozzle check and the Black only is showing up with broken bands on the paper.
Tried a few head cleans and the bands more around but are pretty much still there.
Pulled the print head off and soaked it in a nice solution of very warm windex. Put everything back together and still the exact same results. All colors check good but the black is still missing bands ( Or lines, whatever you want to call them )
On other printers I've had I've been very successful in pushing a very warm solution of windex through the print head through the spikes.
However, no matter what I try I cannot get any color to take any cleaning solution.
What other options am I left with here to really get this thing clean and back running again.
For the nozzle check I'd say I'm missing about 25% of the bands or lines or whatever you want to call 'em
Thanks.