videobruce
Printer Guru
- Joined
- Nov 8, 2006
- Messages
- 170
- Reaction score
- 21
- Points
- 148
- Location
- New York State
- Printer Model
- Canon IP4300 & Panny KX-MB271
Details;
Canon ip4300 printer (new purchased a few years ago, just placed in service to replace the same model with maxed out waste ink pads.
Ink Owl auto resetable carts (no need for a chip resetter) PGI-5 & CLI-8)
Carts are replacing older 3rd party (that needed a resetter) where the sponges apparently dried out causing printing problems. So far I have had 3 carts go empty with no indication they were unlike the older carts which were always 'spot on' when it came to showing the ink reservoir levels. I contacted Ink Owl (upstate NYS) about the problem they reset themselves when they are removed form the caddy. One problem was I wasn't aware of then being auto resettable so I as I did the past 8-10 years 'reset' the carts before I filled them. I told them about my mistake and was told that shouldn't be a problem.
Has anyone come across this problem that the printer is not showing low ink levels? The indicator always shows full no matter what. All other printer functions are ok, no known issues.
Canon ip4300 printer (new purchased a few years ago, just placed in service to replace the same model with maxed out waste ink pads.
Ink Owl auto resetable carts (no need for a chip resetter) PGI-5 & CLI-8)
Carts are replacing older 3rd party (that needed a resetter) where the sponges apparently dried out causing printing problems. So far I have had 3 carts go empty with no indication they were unlike the older carts which were always 'spot on' when it came to showing the ink reservoir levels. I contacted Ink Owl (upstate NYS) about the problem they reset themselves when they are removed form the caddy. One problem was I wasn't aware of then being auto resettable so I as I did the past 8-10 years 'reset' the carts before I filled them. I told them about my mistake and was told that shouldn't be a problem.
Has anyone come across this problem that the printer is not showing low ink levels? The indicator always shows full no matter what. All other printer functions are ok, no known issues.