Recent content by plew

Got a new set of chips in and is working great with the resetted OEM chips.:thumbsup

I think I just purchased a bad batch. The printer knows exactly which carts have the non-oem chips when I swapped back to OEM carts. I have ordered a new set of chips. Thanks for all the input.

Chips were reset to full with resetter. The chips are marked and place in the correct cart but I guess it could have been mislabeled at the factory. The printer seems to be happy when the carts are in place with the door open and tells me to close door. Do you know if it would tell me to...

No, chips were full.

I purchase a set from Horsence Digital Technology. It seems to know that all the carts are there with the door open, shows the ink carts in the display and tells me to close the ink cover. But as soon as I close the door and it does its check it displays ink cart error, please install correct...

Is this mod still working well?

Just read the service manual. There is a porous waste pad under there for ink spills and borderless printing.

Roger, You're right. The ink has leaked out of the cartridge. Is there a way to get into it clean or just let it dry? I can't see to find a way in the bottom of the drawer. Thanks.

Hi All, I purchased some 2oz ink from precision and using Joe's method refilled 60+ml to start. I know not full, but just to check. I emptied all carts, exp 2008, and loaded with new 2oz Precision inks, about 60+ml. New, half full set. Nozzle checks pretty good. Not perfect. Did some...

Cartridges. Thanks for the help. I'll let you posted.

LK is the out of ink cart, #3. All the physical carts are in the correct slots, ink dated 2008.

Hi All, Been reading through the treads and I picked up a 3800 for less than $100. It powered up and showed one low ink and no errors so I picked it up. So I'm looking at the manual and the Matte Black is showing up in the 2 position instead of 1 . Should I call it quits at this point and...