Recent content by gumpy

Hi George, back again have no success in unblocking the system with soaking and cleaning. Will wait for your next instructions. Regards Geoff

Ok we may be on to something. Did the nozzle check and then put the windex on the pads, after the head clean the windex on the small pad for the CMY had been used but the pad for the black was still there. So it looks like the purge system in blocked, where do we go from here. The black ink is...

Hi all, Running a Canon iX4000 A3+ QY6-0064 printhead PGBK5 and CLI-8CMY cartridges. Hoping someone can shed some light on this problem. The situation started out when I was printing some flyers consisting black text and some coloured vector drawings. I started out with a new PGBK5 cartridge...

Hi all, Got an issue with my iX4000 after refilling, resetting and replacing the ink tanks (these have been done numerous times before) an onscreen error message no code number came up and the green power light is on and orange light is flashing 5 times. Any ideas what this error means...

I just got my supply of needles off ebay, they are catheter needles used for body piercing. Theyr'e a bit heavy 16 gauge but long 55 mm. Chicky Boom is an ebay store here in AU and she also sends them to the USA.

stuko, when do you think you will be flogging them on ebay Iam interested here in QLD. gumpy