My sister-in-laws MX420

[Slagathor]

I refilled her cartridges and I was reading the instructions on PC's site and they mention a bit of software that will reset the ink levels and not just disable the reporting.
But the link is dead and I can't find it, anyone know of anything or am I completely misreading the instructions..

http://www.precisioncolors.com/Overriding the Canon Warning for Refilled PG40_V3.pdf

 

[PeterBJ]

There are software tools that can reset the ink levels for some Canon two cartridge printers, but these tools only work with some old cartridge types, not with the more modern types used in the MX420, so in this case it is no loss that the link no longer works.

But by disabling the ink monitor you can print using refilled cartridges. This is typically done by pressing the Stop/Resume or Cancel button for at least 5 seconds when you get an empty cartridge warning. This is the same procedure as with the single ink cartridge printers.

 

[Slagathor]

There are software tools that can reset the ink levels for some Canon two cartridge printers, but these tools only work with some old cartridge types, not with the more modern types used in the MX420, so in this case it is no loss that the link no longer works.

But by disabling the ink monitor you can print using refilled cartridges. This is typically done by pressing the Stop/Resume or Cancel button for at least 5 seconds when you get an empty cartridge warning. This is the same procedure as with the single ink cartridge printers.

Ahhhhh, ok, thank you sir..