mikem65d
Print Addict
- Joined
- Oct 2, 2014
- Messages
- 146
- Reaction score
- 176
- Points
- 167
- Printer Model
- Canon Pro-100, ip6600D, i900D
I spent virtually an hour plus searching for this answer, and as usual came away from the search with added knowledge from topics posted.
I did not find an adequate answer to my maintenance program so i hope you all forgive me for posting this especially if it is somewhere in this board.
These are out of my Pro 100.
I also have a I6600D for photo printing and just set up a used 6600 for my office. When i filled the cartridges i had prepared for the 6600 and looking at the one currently in use for the other i see full saturation from top to bottom in the sponge area.
The CLI-42 carts from the Pro 100 however are only saturated along the bottom. Does the picture show a normal fluid flow?
I did not find an adequate answer to my maintenance program so i hope you all forgive me for posting this especially if it is somewhere in this board.
These are out of my Pro 100.
I also have a I6600D for photo printing and just set up a used 6600 for my office. When i filled the cartridges i had prepared for the 6600 and looking at the one currently in use for the other i see full saturation from top to bottom in the sponge area.
The CLI-42 carts from the Pro 100 however are only saturated along the bottom. Does the picture show a normal fluid flow?