pearlhouse
Print Addict
- Joined
- Feb 17, 2011
- Messages
- 227
- Reaction score
- 76
- Points
- 183
- Location
- Brunswick, Ohio USA
- Printer Model
- Canon mx892 & mx922
I have not followed this subject since it came up so I guess I need a little updating. I use Precision Colors inks and the last batch I bought was 12/8/2014 These were labeled as C221(c-m-y)D inks. The blacks were C1128P & C1109D. Ive recently had problems with my Magenta ink plugging up the printhead on my older printer which uses CLI 221 carts. I also use the same ink in my newer printer using CLI 251 carts. Im in the process of cleaning the printhead on the older printer because the magenta would not print at all.
So do I need to scrap this Magenta ink or all the inks? IF so then do I need to flush these carts and start all over with fresh ink?
Is there one thread that explains this whole situation that will help me understand what is going on with this fungus problem....
So do I need to scrap this Magenta ink or all the inks? IF so then do I need to flush these carts and start all over with fresh ink?
Is there one thread that explains this whole situation that will help me understand what is going on with this fungus problem....