Canon Pixma IP2000 Waste ink absorber problem

[diabolic53]

I have an Canon Pixma IP2000 and recently it stop't working and when i try to print something it shows me this eror " The waste ink absorber is full Contact .... " i disassembled the printer and cleaned the waste ink absorber but it still won't print anything ... do you guys have any ideea ???

 

[jflan]

Welcome to Nifty-Stuff !

Try this :


Reset ip2000 / 3000

1. Turn off printer
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not,
press the Power button once more.
8. Your printer should respond as normal..

 

[diabolic53]

thx ... did that ...worked like a charm

 

[terminala]

Yes, this work fine.
Great thank's

 

[sparten]

thnx this helped well