I have a Canon Pro 1000, and midway through my prints, I noticed the colour was off, usually, this will be due to a blocked nozzle. I did a nozzle check and the Cyan was completely gone, done a deep clean and the Cyan is now printing out on the check Red.
I have done a System clean and the...
I am on my 3rd Epson Printer, xp-860, R3000 and now a P800.
They all have one thing in common, When printing Artwork with a Border, they all start by printing off perfectly as it is shown on the screen(equal borders all around)
After some time though they start printing to the right, Meaning...
I have a epson r3000 and a P800 both running inktec powerchrome k3 pigment inks.
I have downloaded the paper profiles for each specific printer from the paper supplier yet the difference in print is big.
I need to get them to print as close as possible to each other.
Do I need to invest in a...
I just recieved my epson p800 today.
I have printed off about 20 prints today. On 8 occasions it stopped printing half way, ejected the paper then started printing it again. On one occasion the second print also ejected to start again..
The printer is connected to my router via the ethernet...
When i originally bought my refill kit for my printer, At the time of looking I seen somewhere had 29ml carts instead of the 26ml or whatever it is. This meant that the part of the cart that you need to prime the ink into never ran dry before the printer thought the cart was empty.
The reason I...
Somehow I have managed to get air into my light cyan lines. It happened before and I ran the wic reset ink charge and the problem was resolved. Unfortunatly this time most of my carts were almost empty. To empty to run the ink charge so I have been sitting here for the last 4 hours running purge...
I have a Canon Pixma Pro 100s that I need rid of as I've just bought a epson r3000 pigment ink printer.
It has only ever used one set of cartridges which need replacing.
Everything is in the box.
In perthshire in Scotland
I just got my R3000 today. Printed a couple via USB and it was a decent speed.
Onto Wifi and it is insanely slow. I started printing something in A3, Went away out to the shop, Came back and it's still printing. Just made a cup of tea, Sat down to write this and as I speak it is stil printing...
Not sure if this is allowed so if not let me know.
I have a full set of Genuine Canon Carts already been used for refill so ready to fill, I have the chip resetter and some octoink, Between 20 and 40ml of each colour, also all the clips etc. So enough to get someone going. Cost me over 100quid...
Hi guys, I was originally running a all in one epson xp-860 for printing off artwork in A4 which when it came to black(90% of my work) I was more than happy with.
I ran a CISS in it and it worked a charm well except when I bought some poor pigment ink, the results were awful.
Anyway. I got a...