Hi, very interesting to me.
It is transfer technique, not DTG.
It looks like somehow reworked concept of making PCB with laser printer and transfer paper (+ developing).
Thanks for sharing.
Factory Mode is intended to test printer in clean way - without printhead and ink tanks. Printer can feed the paper and "print" (everything is moving inside like in User Mode). USB, Wi-Fi, card reader and other inputs are disabled in FM.
One can use FM to test printer for mechanical errors, for...
Hi,
I'm afraid so.
Remarks:
1. Strange noise at startup seems to be from LF motor running very fast...
2. Encoder disc is OK.
3. Motherboard checked in another printer with same results.
Łukasz
Hi.
1. Resetting software is needed, newest is ST4720 but it seems to be affected by some malware, just please read (http://www.printerknowledge.com/threads/mg6450-service-mode-hangs.11332/#post-95358).
2. Entering service mode without proper software will result in locking service mode for...
Please make sure CD-Tray is closed before entering service mode.
By "cd-tray" I mean "Inner cover", sorry.
Example:
https://support.usa.canon.com/kb/index?page=content&id=ART111163&cat=5292B002&actp=LIST
1. If ceramic plate is detached from printhead body, then nozzles are filled with dust already.
2. Is there short-circuit condition in printhead (U052, B200)?
3. There is no need to detach memory tag (EEPROM) from green plate, signals pins are directly wired to connector.
4. EEPROM programing...
According to my experience, only a definitely never reseted OEM chip will show low ink warning correctly.
But it still does not mean, that ink is flowing inside printhead nozzles.
Ł.
And without getting Error 5C20?
Maybe it is easier to replace entire print engine (without motherboard and it's metal plate) - fits from iP4840 and iP4940 (MG5240, MX884 and MX894).
Ł.
Bi-directional printing is not same thing like multi-pass printing.
Bi-di means, that printhead will print while moving from purge pad to end position (first pass), and another time while returning (another pass).
Uni-di means, that printhead won't print while returning, so it make only one...
I agree with your arguments, but:
It took over 2 minutes to start parking procedure when lid is open and printhead in place.
According to my experience, carriage without printhead won't park at all until power-off.
If carriage is left outside parking station, it is very vulnerable to damage...
One thing is important - "proper data".
Please note, that @bahaa is from region 4. And Ukraine is also region 4 (like Middle-East, Russia, Central Asia and Africa), and new EEPROM data was from Ukraine. Some ink recognition problems may occur if regions do not match.
(btw - according to google...
Hi,
is it MG5100 series (MG5150 in UE, MG5120 in US)?
To me looks like QY6-0073 printhead nozzle check.
I got exactly same print from my MG5150 when I filled C, M, and Y carts with neutral liquid (IPA/deionized water mixture).
So, if this happened in working printer, try stamp test to check...