Search results

Dear Nelson, Thanks again for your kind information! I resettet the chips in my empty original cartrides - now they are recognized in the printer (as "foreign" cartridges). I ordered the empty cartridges via alixexpress and will assemble everything as soon as it arrives. Thanks for helping me...

I report how I resolved an Ink Leak Sensor Error 034831 on an SC-P900. 1) How I triggered the error: I flushed the printer using an alternative black-and-white ink set via the Epson Service Program (‘Ink Charge’). This flushed the existing colour ink from the tubes and refilled the tubes with...

Dear Nelson, thanks for this information. Unfortunalely, the second P900 came without any catridges (and therefore, without any chips). I don't have any cartridges left. This is why I need a) empty cartridges, b) chips, and c) a resetter that is compatible with the chips.

Hi Nelson, the P900 is up and running a 10-ink-black-and-white inkset. All worked out perfectly. I now have another P900 (a very lucky occasion). May I ask you for the source of the cartridges and the resetters, so I can start using the second printer, too? Thanks a lot, best, Thilo

I had the great pleasure of participating in the beta test of MakeQuad2.6 and learned a lot along the way. The results demonstrate that the program drastically and reliably simplifies the creation of linearized curves for QTR. I tested the software using an Epson 3880 and a P900, both equipped...

Perfect - I'll keep that important information in mind and stick a note right to the printer. Reading your mail: What about the waste ink tank? Can I reset the tank in the same way (before it comes down to 15%) and use it again and again? For my 3880, I used 2 waste ink tanks: A new one and a...

Thanks a lot, Nelson! I checked the parcel, everything look good, and the paper reminded me on christmas! Best regards, Thilo

Hi there, I'm Thilo and new in this round. It's impressive to read an learn from your experience. I'm mostly exploring the many options that QuadToneRip offers, started with an 1800, going to different 3880, and now starting with an P900. Next project is mixing and diluting an inkset for 10...