Search results

  1. MooreDesignLabs

    Fix for Epson Artisan 1430 printing black & whites with poor results and greenish hue

    This is mind blowing to me because of all the things to overlook, converting to grayscale could be one of the issues for printing this specific image. I switched from CMYK to Grayscale with the correct settings and the results were the same. Totally off with green hues everywhere. This should...
  2. MooreDesignLabs

    Fix for Epson Artisan 1430 printing black & whites with poor results and greenish hue

    You guy's are nuts on spam it's insane. Which is nice because I feel like this truly is a spam free forum. But I'm literally one person and you know my website already. I'm not related to him at all. Just going down similar ventures. I removed the link if that was concerning. We can just leave...
  3. MooreDesignLabs

    Fix for Epson Artisan 1430 printing black & whites with poor results and greenish hue

    I choose the paper type and settings in the driver and then print through photoshop with printer managing colors. Nozzle check is flawless for every channel. I thought it was the paper at first because it was giving me other issues in my Pro-100. I switched from A-Sub 11x17 Luster to Epson...
  4. MooreDesignLabs

    Fix for Epson Artisan 1430 printing black & whites with poor results and greenish hue

    I have an Artisan 1430 here that prints color images flawlessly. However, when I shifted to black and white prints, they print incredibly poor and are covered with a greenish hue over many parts. Has anyone encountered this before? The head was serviced and cleaned with a flawless nozzle check...
  5. MooreDesignLabs

    Epson 3880. Close cover alert

    There's a sensor on the left corner of the printer that pops off when released. Clean the sensor area and contacts with a cotton q-tip and IPA. I have one of my 3880s open so I took a picture to show you where it is.
  6. MooreDesignLabs

    Top paper feed not working in Epson Stylus Pro 3880 printer. Any ideas?

    I just picked up a pretty used Epson 3880 that I will be servicing and restoring back to normal hopefully. I got it started up fine, however it will not correctly feed the paper from the top. Normally I see the backplate or platen where the paper rests kick out to start the feeding process to...
  7. MooreDesignLabs

    Just had the funniest scare restoring a Stylus Pro 3880.

    I hope everyone can enjoy this story because it just happened. I got my hands on a 3880 with some mileage on it but overall in excellent condition. Even including the original box. I got it home and started it up. Everything looked good on the LCD panel for ink amounts. I reset the maintenance...
  8. MooreDesignLabs

    Epson sure color P900 print head/nozzle issue?

    It may not even be on the printhead itself. It could be on the motherboard or somewhere else on the printer. I wish I had more information for you.
  9. MooreDesignLabs

    Epson SureColor P800 - Can someone identify ink colors to nozzles on the printhead?

    Can someone please help me identify which color channel goes where on the Epson P800 printhead? I have these figured out so far.
  10. MooreDesignLabs

    Epson sure color P900 print head/nozzle issue?

    That's not caused by temperature. I have to agree with Pharmacist here that it looks electrical. Look at how perfect the nozzle check is, the cyan doesn't look like a clog. It looks like a fault. With clogs generally you can see the progression happen and go away as you run the head cleaning...
  11. MooreDesignLabs

    LD Products Giving Me The Runaround - Do not use!

    I was in a jam for a Light Cyan to restore an Epson 3880 printer and ordered one of the cartridges from them. The quality of their ink and customer service is atrocious. They never informed me that the ink cartridge was on a 2 WEEK minimum backorder. I had to reach out asking if my order has...
  12. MooreDesignLabs

    Has anyone used Precisions chipless kit for the SC-P800?

    Thank god these cartridges are larger than my other Epsons. Doing that procedure almost 10x in a row could get tedious. But it's well worth it for the reduced cost and print quality. Plus it looks like I already have my set of ink cartridges ready for modding at home. Money saved there as well...
  13. MooreDesignLabs

    Has anyone used Precisions chipless kit for the SC-P800?

    I'd be lying if I said I wasn't envious of your right to repair laws in EU. Especially in this case! I saw that Precision Colors recommended the chipless solutions with their cartridges. I would much rather be using genuine cartridges than aftermarket. Is there a guide to modifying genuine p800...
  14. MooreDesignLabs

    Has anyone used Precisions chipless kit for the SC-P800?

    I'm about to be using a P800 and would like to get the most out of my prints by using precision colors chipless kit. Has anyone used it here? If so, how did you like it? And how easy was working with the firmware? It looks too easy to be true in my opinion. Thanks in advance.
  15. MooreDesignLabs

    Anyone have an Epson printhead that flows but doesn't work? I want it! - ART PROJECT

    I just looked them up and they should work perfectly! I'm sending a DM now :)
  16. MooreDesignLabs

    You know you're a printer addict when...

    ▶ You know you're a printer addict when you have a wire brush in the shower to clean ink stains on your hands. ▶You know you're a printer addict when each room in your home has a printer in it. ▶You know you're a printer addict when Staples knows you by name for their rewards program ▶You know...
  17. MooreDesignLabs

    Anyone have an Epson printhead that flows but doesn't work? I want it! - ART PROJECT

    I have a unusual art project that I'm starting where I'll need a used Epson printhead that will still flow liquid through. Preferably one that has the male ended nozzles as it will be easier for me to work with than Canons flat pad setup where the ink cartridges rest. The only printheads I have...
  18. MooreDesignLabs

    Would there be potential damage to a Stylus 1400 if it was powered on without the printhead connected?

    Thank you so much for letting me know that! I had no idea the ribbon cables were so fragile for Epson. The ribbon cables looked decent. They were never removed before, I could confirm that. I have a couple 10 fuses coming to see if I can swap out the F1 part of the mainboard. We'll see! I'll be...
  19. MooreDesignLabs

    Would there be potential damage to a Stylus 1400 if it was powered on without the printhead connected?

    Lately I've been trying to make sure the printheads going back in are nice and dry before installing. And remembering to put the same ink cartridges back in before it was powered off. I ran into a unique scenario today and was wondering if anyone could tell me what happened. I received a mint...
  20. MooreDesignLabs

    Green and white printhead chip colors

    I've noticed a handful of sellers selling printheads with white chipboards. While the one I have that's genuine is the standard green. I've read that white boards are uncoded/decoded/universal and are cheap chinese knock offs. Is it true for all of them?
Top