paullowry
Printing Apprentice
- Joined
- Mar 29, 2017
- Messages
- 7
- Reaction score
- 4
- Points
- 14
- Location
- Lorraine Quebec, ( canada)
- Printer Model
- epson 3800, p800
Hello
I’m replacing a capping station in a 3800. I made it all the way in and replaced the part but now but I’m having trouble getting back. I’m stuck at the board paper tray. It won’t lock shut. I’m pretty sure the eject slider is properly positioned all tension springs are back in place. I did have trouble keeping the “LINK EJECT RIGHT “(that small white plastic plate that fits inside the “GUIDE PAPER GUIDE BOARD PAPER RIGHT” (that black plastic guide the spur gear runs along) on the pivot of the “PAPER EJECT SLIDER”. But presently both guides and link plates are properly secured by the pivots.
If any one else has been here and found the solution I would appreciate any help you might be able to offer.
Thank you
Paul
I’m replacing a capping station in a 3800. I made it all the way in and replaced the part but now but I’m having trouble getting back. I’m stuck at the board paper tray. It won’t lock shut. I’m pretty sure the eject slider is properly positioned all tension springs are back in place. I did have trouble keeping the “LINK EJECT RIGHT “(that small white plastic plate that fits inside the “GUIDE PAPER GUIDE BOARD PAPER RIGHT” (that black plastic guide the spur gear runs along) on the pivot of the “PAPER EJECT SLIDER”. But presently both guides and link plates are properly secured by the pivots.
If any one else has been here and found the solution I would appreciate any help you might be able to offer.
Thank you
Paul
