Pro 1 only printing some of image

GaryJay

Getting Fingers Dirty
Joined
May 14, 2015
Messages
11
Reaction score
11
Points
45
Printer Model
Canon Pro 1
Started my Pro 1 after a month and a half of hospital stay. Printing the collage I downloaded from JToolman site to check printer. Printing in Lr and Ps,both with printer manages colour settings and all settings correct for this process. Use OEM inks and carts, for this I was using Canon Pro Lustre A4 and A3 paper. The printer stops printing part way through the print and ejects the print,it then goes through the feed process again as if I had a number of images to print, it only stops when I cancel printing in Lr or Ps.Photo attached.
 

Attachments

  • _5130202.jpg
    _5130202.jpg
    445.5 KB · Views: 287

GaryJay

Getting Fingers Dirty
Joined
May 14, 2015
Messages
11
Reaction score
11
Points
45
Printer Model
Canon Pro 1
I have had printer for at least 41/2 years.
 

The Hat

Printer VIP
Platinum Printer Member
Joined
Jan 18, 2010
Messages
15,618
Reaction score
8,691
Points
453
Location
Residing in Wicklow Ireland
Printer Model
Canon/3D, CR-10, CR-10S, KP-3
@GaryJay, The problem you describe is much like a communication error (Interruption of data), between computer / printer while the printer was printing, because the printer couldn’t finish the print, it may have tried to complete the process again....
I wish you continued good health my friend.. ;)
 

GaryJay

Getting Fingers Dirty
Joined
May 14, 2015
Messages
11
Reaction score
11
Points
45
Printer Model
Canon Pro 1
Do you think that might be a cable prob from computer to printer, I use the USB 2.0 connection
 

The Hat

Printer VIP
Platinum Printer Member
Joined
Jan 18, 2010
Messages
15,618
Reaction score
8,691
Points
453
Location
Residing in Wicklow Ireland
Printer Model
Canon/3D, CR-10, CR-10S, KP-3
Do you think that might be a cable prob from computer to printer,
Most USB cable connections are rugged and reliable, but a quick check is always advisable, if the computer is not a suspect, a split-second mains power glitch can also affect data transmission, the best thing to do is to try the same print again, using the same App. .. But it may have been just a one-off thing..
 
Top