black cart nozzle check shows totally empty after full cleaning and just one print

Paul W.

Print Addict
Joined
Jan 9, 2013
Messages
339
Reaction score
183
Points
192
Location
Billings, MT
Printer Model
Epson 1430 HP 932 Canon iP8720
I haven't been here for months, my 1400 had finally settled down. Every few days I did a nozzle check and it was perfect almost every time. Once in a while I'd do the simple head cleaning in the 1400 Maintenance menu. My inkset is Paul Roark's Eb6, where the carts include one with 100% black, the remaining five containing various dilutions of the black.

Lately my black cart shows as totally empty (in the nozzle check) after a refill and only one print, and I've done every cleaning trick in my repertoire. I did the under head shoe-shine, cleaned the K nipple, wiper blade, capping station. It only worked for one print. I even removed the filler plug for one cleaning and I immediately got a perfect K check but it too was only good for one print. The cleaning fluid was Piezoflush.

Thanks all!

Paul
 

Paul W.

Print Addict
Joined
Jan 9, 2013
Messages
339
Reaction score
183
Points
192
Location
Billings, MT
Printer Model
Epson 1430 HP 932 Canon iP8720
Am meeting some success. I went through all the steps again that I mentioned earlier. I've learned that "technique" over the years. And another basic is quite simple: patience. Sometimes letting the printer sit a while works. Looking back, I think I had some serious air blockages and they worked themselves out. So far so good.

1) repeat repertoire, slowly, and 2) be patient.
 

Latest posts

Top