Epson 2700 All Lights blinking

Tyler Pickering

Getting Fingers Dirty
Joined
Dec 21, 2018
Messages
36
Reaction score
15
Points
24
Printer Model
Epson 2700 Ecotank
I tried to print something today and my printer made a weird noise and pulled the paper in about an inch then all the lights started blinking. There wasn't anything jammed in the printer and I followed all steps on the Epson website as well as calling their tech support ( Who were completely useless by the way).

Do you guys have any ideas?

Epson said to call back monday and their advanced support would see about replacement ( This would make it my 4th replacement for the original printer)
 

stratman

Printer VIP
Platinum Printer Member
Joined
Apr 19, 2007
Messages
8,712
Reaction score
7,163
Points
393
Location
USA
Printer Model
Canon MB5120, Pencil
Epson said to call back monday and their advanced support would see about replacement
Take the replacement and run.

Otherwise you may need to be more specific on that happens during this malfunction, such as what lights, do they blink in a repeated cycle, and if so, how many blinks per repeated cycle.
 

Tyler Pickering

Getting Fingers Dirty
Joined
Dec 21, 2018
Messages
36
Reaction score
15
Points
24
Printer Model
Epson 2700 Ecotank
All lights blink. Error code 000041. Second time this has happened, they replaced not even month ago because of it.

I would definitely not recommend to anyone to purchase a Ecotank-2700 and I should've done more research before purchasing.
 

websnail

Printer VIP
Platinum Printer Member
Joined
Oct 27, 2005
Messages
3,661
Reaction score
1,345
Points
337
Location
South Yorks, UK
Printer Model
Epson, Canon, HP... A "few"
Unfortunately if you're getting replacement printers you are getting units that have already failed, barely been refurbished and then just shoved out the door to fail for someone else.

I would take the replacement one more time but at the same time I would consider consulting your consumer rights to see if you can force them to replace with a brand new model instead of refurbished units. Good luck either way!
 

Ink stained Fingers

Printer VIP
Platinum Printer Member
Joined
Dec 27, 2014
Messages
5,838
Reaction score
6,965
Points
363
Location
Germany
Printer Model
L805, WF2010, ET8550
You may run the status report of the WIC Reset utility ( I think it only runs on Windows) ,the report lists the
last 5 critical errors with the failure code and a short description. This may point you into the right direction.
 
Top