The Royal Game of Ur - UPDATED for Nifty ;)

Redbrickman

Printer Master
Joined
Dec 27, 2010
Messages
1,105
Reaction score
1,188
Points
293
Location
UK
Printer Model
MB5150
So here we go.... Second board print with black circles on the board as I ran out of blue and stage by stage pics for Nifty ;)

Start of the short board print

IMG_0448.jpg

Completed short section

IMG_0453.jpg

Counters completed

IMG_0454.jpg

The white circles raft takes shape

IMG_0456.jpg

Petals

IMG_0483.jpg

Black circles starting on the new Lokbuild surface

IMG_0496.jpg

Multiple sized circles completed

IMG_0498.jpg

Assembly begins. The small circles required tweezers to position them and all the parts were a little tighter this time, so once lined up a tap with the handle end of a screwdriver seated them. If you build one the small circles will test your patience! The petals were the opposite, a little bit loose so a dab of superglue made sure they will not come out

Finished. There is a little bit of clean up to do as some smaller circular parts did not break away cleanly from the raft, but a scalple will easily remove the extra bits. On hindsight I should have really slowed down the printer for the circles but no ne will notice when they are playing :)

IMG_0522.jpg
 

stratman

Printer VIP
Platinum Printer Member
Joined
Apr 19, 2007
Messages
8,712
Reaction score
7,172
Points
393
Location
USA
Printer Model
Canon MB5120, Pencil
Great job, Red! Since you introduced this game to the forum I have become a fan. Fun!
 

The Hat

Printer VIP
Platinum Printer Member
Joined
Jan 18, 2010
Messages
15,626
Reaction score
8,696
Points
453
Location
Residing in Wicklow Ireland
Printer Model
Canon/3D, CR-10, CR-10S, KP-3
Nice one Redbrickman and very well Illustrated photos, when your doing anything small it’s better to print that bit slower to avoid any flutter but saying that, there is nothing wrong with your output, it looks excellent.

Any competitors, companions or challengers for a game yet, because it can’t be played online like you would with Chess, so I reckon maybe the pub might be a good place to encourage some followers..
There is a little bit of clean up to do as some smaller circular parts
P.S. I wouldn’t go using a scalpel on any small plastic parts because you might end up piercing your fingers instead.. Ouch...
 

stratman

Printer VIP
Platinum Printer Member
Joined
Apr 19, 2007
Messages
8,712
Reaction score
7,172
Points
393
Location
USA
Printer Model
Canon MB5120, Pencil
Top