Grey lady Down...

berttheghost

Printer Guru
Joined
Dec 31, 2014
Messages
114
Reaction score
96
Points
117
Location
Minnesota, USA
Printer Model
canon pixma pro 9500, pro-1
Sorry to hear about your mainboard. Sounds like your extruder's stepper driver burned out. Was the printer doing lots of retractions? That can do it.

You might want to check your mainboard cooling. Sometimes the airflow across the board is blocked by the way wires are routed.

You might also want to check the stepper voltage pots on the old mainboard in case the new one isn't set up properly. They should probable be in the 0.9v to 1.0v range, but don't quote me. The mainboard on my printer (a red melzi board) came completely unconfigured.
 

The Hat

Printer VIP
Platinum Printer Member
Joined
Jan 18, 2010
Messages
15,610
Reaction score
8,688
Points
453
Location
Residing in Wicklow Ireland
Printer Model
Canon/3D, CR-10, CR-10S, KP-3
Sorry to hear about your mainboard. Sounds like your extruder's stepper driver burned out. Was the printer doing lots of retractions? That can do it.
@berttheghost, That might be the cause of it all right, I had it running more than 8 hours with a lot of retraction, I had several pieces on the bed at the one time...
Thank you...:thumbsup
 

stratman

Printer VIP
Platinum Printer Member
Joined
Apr 19, 2007
Messages
8,712
Reaction score
7,163
Points
393
Location
USA
Printer Model
Canon MB5120, Pencil
Grey Lady Down - love submarine movies! This one had the late, great Charlton Heston.
 

Nifty

Printer VIP
Administrator
Joined
Nov 3, 2004
Messages
3,046
Reaction score
1,405
Points
337
Location
Bay Area CA
Printer Model
CR-10, i560 ,MFC-7440N
@The Hat , what a bummer! I'm impressed with the trouble-shooting steps you've already undertaken!

8 weeks!?! Ugh, that's got to be frustrating! Where did you get it? Were there other options, or was that the only source?

I'll cross my fingers that you'll stumble on the problem and be able to fix it way sooner than that! :fl
 

The Hat

Printer VIP
Platinum Printer Member
Joined
Jan 18, 2010
Messages
15,610
Reaction score
8,688
Points
453
Location
Residing in Wicklow Ireland
Printer Model
Canon/3D, CR-10, CR-10S, KP-3
8 weeks!?! Ugh, that's got to be frustrating! Where did you get it? Were there other options, or was that the only source?
My timing is always perfect, right at the start of the Chinese New Year, Woof, Woof, so they wont ship till after the 26th, and then it takes 21 days to clear their customs and onto a flight Via Germany.

But our Customs here sit on most things for 28 days before making any decisions, Feckin typical public servants, I reckon most countries may operate much the same.

The other option was to purchase from the US, that would take 3 to 4 weeks, (Customs again), but the same boards are twice the price there, and courier charges @$55 all add up before the revenue get their grubby hands on it.

The Customs have a field day, they calculate 25% Vat on item purchased, plus 25% Vat on courier charge, plus a handling charge, for something I can get for ¼ the price by waiting, I reckon I’d rather wait, its less painful...
 

stratman

Printer VIP
Platinum Printer Member
Joined
Apr 19, 2007
Messages
8,712
Reaction score
7,163
Points
393
Location
USA
Printer Model
Canon MB5120, Pencil
All things considered, the US Postal Service is quite good if not excellent.
 

The Hat

Printer VIP
Platinum Printer Member
Joined
Jan 18, 2010
Messages
15,610
Reaction score
8,688
Points
453
Location
Residing in Wicklow Ireland
Printer Model
Canon/3D, CR-10, CR-10S, KP-3
All things considered, the US Postal Service is quite good if not excellent.
Most if not all companies’ in the US use International couriers to transport goods across the Atlantic, in a perfect world I would choose USPS every time, because its cheaper and there is no VAT to be paid most of the time, when I inquire, I’m told it must be a courier... :barnie
 

stratman

Printer VIP
Platinum Printer Member
Joined
Apr 19, 2007
Messages
8,712
Reaction score
7,163
Points
393
Location
USA
Printer Model
Canon MB5120, Pencil
Even the USPS uses private parcel services (UPS?) within the US to make USPS deliveries. I still find it amazing that for $0.49 I can send private communications from one side of the country to the other delivered to the mailbox of the recipient in 2-3 days. I'd wait longer if they would bring back the awesome Pony Express. :D

219_pony_express_recruitmnt.jpg
 
Top