pharmacist's latest activity
-
pharmacist reacted to Ink stained Fingers's post in the thread You don't need much patches to create a good printer profile with
Like.
I expect a marginal change for the DeltaE 165 vs. 192 - value only - in the range of reading noise/variations behind the decimal point... -
pharmacist replied to the thread You don't need much patches to create a good printer profile.I hope you will report back and see how this target will perform compared to a larger patch size target like 729 or even 2880 patches...
-
-
pharmacist reacted to Ink stained Fingers's post in the thread You don't need much patches to create a good printer profile with Like.
@pharmasist - it works - I printed your 192 patchsheet on a 10x15 cm card and scanned it with the i1io2 robot - it works !!! - that was...
-
pharmacist reacted to Ink stained Fingers's post in the thread You don't need much patches to create a good printer profile with Like.
You got it - it's 192 different colors
-
pharmacist replied to the thread You don't need much patches to create a good printer profile.I think I might have found the doubles and removed them. I think these are the last 6 RGB patches (with different hues) before the near...
-
-
pharmacist replied to the thread You don't need much patches to create a good printer profile.OK, I will have a check. Maybe you can tell me which patches are doubles, so I can change them. Thanks for the feedback.
-
pharmacist reacted to Ink stained Fingers's post in the thread You don't need much patches to create a good printer profile with Like.
Did you check if you have some dublettes with the same gray value along the gray axis - your standard 5x5x5 matrix of control points...
-
pharmacist replied to the thread You don't need much patches to create a good printer profile.Having some time I managed to enhance my 165 patch simple target with 1 extra row + 1 extra column to get 192 patches, still within the...
-
-
pharmacist reacted to mavtop's post in the thread Vintage HP/GretagMacbeth Eye-one Pro spectrophotometer: still sealed with Like.
This is mine :) If you want to fix the hole, use that of the little one ruler (you have the link to download it) it has a bigger hole...
-
pharmacist reacted to wilko's post in the thread Strange behaviour with aftermaket CL-581 cartridges with Like.
Have three TS700 series printers. Best ever Canon budget printer, IMO. I always use good quality ink, OCP or Inktec in refillable ink...
-
pharmacist reacted to The Hat's post in the thread You don't need much patches to create a good printer profile with Like.
So when it comes to profiles, smaller is better, or as good as ! :ep
-
pharmacist reacted to Ink stained Fingers's post in the thread You don't need much patches to create a good printer profile with Like.
the test with a 096 patch profile delivered a deltaE of 1.4 vs. the high patch count - 2880 profile which is slightly wider than the...
-
pharmacist replied to the thread You don't need much patches to create a good printer profile.Many thanks for the comparison: Actually the Spyderprint High Quality target with only 225 patches seems to produce already very good...
-
pharmacist reacted to Ink stained Fingers's post in the thread You don't need much patches to create a good printer profile with Like.
I did another test and compared a print done with a profile with 165 color patches vs. a print with a profile with 2880 patches, printed...
-
pharmacist replied to the thread You don't need much patches to create a good printer profile.I was wondering if this can be done too with ArgyllCMS. I will make a target for ArgyllCMS also using 165 patches on 10x15 cm photo card.
