James Mike
Fan of Printing
- Joined
- Aug 2, 2014
- Messages
- 92
- Reaction score
- 64
- Points
- 67
- Location
- Caloocan
- Printer Model
- Canon MG6270;G3010
Hi, a new (sorta) member from the philippines who came upon this site to learn more about refilling the MG6270 and places to get ink for it (refills here are pretty much are for tricarts and no greys are available only in oem form but even that is rare)
i'm currently refilling it with some elcheapo ink here that is generically prescribed for hp & canon printers (only the label is different) for the dyes while the pigment black is still oem since the first ink i tried left streaks and missing lines and the other one is so hard to find ,more than twice as expensive and not guaranteed to work with the printer that i figured that it should remain oem until proper inks arrive.)
i'd like to ask if this setup is okay as a temporary measure or should i wait for the inks and in the mean time stop using the printer if oem cartridges are unavailable?
Current print nozzle check:
Nozzle check with pigment refill:
i'm currently refilling it with some elcheapo ink here that is generically prescribed for hp & canon printers (only the label is different) for the dyes while the pigment black is still oem since the first ink i tried left streaks and missing lines and the other one is so hard to find ,more than twice as expensive and not guaranteed to work with the printer that i figured that it should remain oem until proper inks arrive.)
i'd like to ask if this setup is okay as a temporary measure or should i wait for the inks and in the mean time stop using the printer if oem cartridges are unavailable?
Current print nozzle check:
Nozzle check with pigment refill:
Last edited:
