epson 3880 error 1501 release phase detection error.

[Enzo]

Hello I tried to put a sheet 8 1/2 x 11 "bond in the front tray of the printer epson 3880 for a test print, the introduction sheet gave me an error 1501, look in the manual and error corresponds to bug release phase detection error. that solution could give you, I do not think a single sheet has damaged the team.

 

[Enzo]

(to take the printer is jammed sheet, given that mistake it off and removed the jammed sheet and now continues to give the error. When I turn on the printer does not sound normal initialization.)

 

[Enzo]

Just to tell you how to solve the problem and for others to solve, Disarmament complete and reaches the printer and discard SENSOR RELEASE RELEASE MOTOR and connecting the printer disarmed and the engine runs. so the team made a noise like a toothed wheel was out of gear was discovered the problem and put in place and put the flag RELEASE SENSOR in the position of not stopping. I tried the equipment and gear and the printer worked perfectly and gave no error. I closed the computer and you are finally working in perfect condition.
All this happened for a sheet jammed in the front tray.
I did it with the help of the Service Manual.