Comparison of the new ECO Tank printers

Roy Sletcher

Indolent contrarian
Platinum Printer Member
Joined
Dec 20, 2010
Messages
978
Reaction score
1,007
Points
233
Location
Ottawa, CANADA
Printer Model
Canon Pro-100, and Epson 3880
Not to belabor everything and the kitchen sink, but... do dye-based inks stain stainless steel sinks?

Short answer - In my experience NO.

Longer answer: I washout, clean, and purge dye based ink carts over a stainless steel sink without any obvious staining. For the most part the the sink's exposure to what is exclusively PS dye based inks is relatively short - probably minutes not hours.

rs
 

websnail

Printer VIP
Platinum Printer Member
Joined
Oct 27, 2005
Messages
3,661
Reaction score
1,345
Points
337
Location
South Yorks, UK
Printer Model
Epson, Canon, HP... A "few"
Not to belabor everything and the kitchen sink, but... do dye-based inks stain stainless steel sinks?
In my own experience they only stain deposits such as limescale, dirt, etc... they don't stain the clean metal...

It's a great way to prove that you have indeed cleaned... or.. erm.. not. :oops:

Same thing happens in ceramic sinks but all bets are off if the glaze has been damaged, exposing the ceramic underneath..
 

Ink stained Fingers

Printer VIP
Platinum Printer Member
Joined
Dec 27, 2014
Messages
5,838
Reaction score
6,965
Points
363
Location
Germany
Printer Model
L805, WF2010, ET8550
ref clogging prevention - just do what you think does the job for you . There are so many different recommendations published that it is not clear which one would be better than another. And enjoy printing the way you do it.
 

stratman

Printer VIP
Platinum Printer Member
Joined
Apr 19, 2007
Messages
8,712
Reaction score
7,163
Points
393
Location
USA
Printer Model
Canon MB5120, Pencil
Thanks @Roy Sletcher and @websnail for the info.

I have used a cement sink to refill over and it can stain if you don't wash away dripped ink soon enough. Will be switching to a stainless steel sink for next refill.
 

Ink stained Fingers

Printer VIP
Platinum Printer Member
Joined
Dec 27, 2014
Messages
5,838
Reaction score
6,965
Points
363
Location
Germany
Printer Model
L805, WF2010, ET8550
You could run a test whether Clorox or Windex would do a better cleaning job.....
 

The Hat

Printer VIP
Platinum Printer Member
Joined
Jan 18, 2010
Messages
15,618
Reaction score
8,691
Points
453
Location
Residing in Wicklow Ireland
Printer Model
Canon/3D, CR-10, CR-10S, KP-3
@Harry Briels, you have a good way of increasing the humidity inside your printer all right, but if you turn on and forget to remove the container, the humidity will also increase in the print room.:barnie *!&!**

You would also need to place a sheet of paper on top of the printer with big printed type on it saying "Don’t forget about the humidity thingy "...:old

I know I'd forget...:eek:
 

stratman

Printer VIP
Platinum Printer Member
Joined
Apr 19, 2007
Messages
8,712
Reaction score
7,163
Points
393
Location
USA
Printer Model
Canon MB5120, Pencil
You could run a test whether Clorox or Windex would do a better cleaning job.....
Alas and forlorn, I no longer live there and doubt the current owners would appreciate our thirst for knowledge.
 

Latest posts

Top