Harry Briels
Printer Guru
- Joined
- Aug 10, 2014
- Messages
- 181
- Reaction score
- 104
- Points
- 142
- Location
- Mechelen Belgium
- Printer Model
- EPSON Pro 3880 & Canon MX925
I learned from the extensive information regarding using OEM carts that are modified (method jtoolman) into two way valves, that after filling these carts to approx. 150g total weight and after resetting all chips to full, that in the course of printing gradually the decreasing ink level will show on the LCD.
In my case this doesn't work like this. All ink levels stay at full after printing a lot. I checked the present weight of each cart and none of the carts is full anymore, which is logical.
But the LCD shows full carts!
What mistake do or did I make that causes the ink levels staying to full?
In my case this doesn't work like this. All ink levels stay at full after printing a lot. I checked the present weight of each cart and none of the carts is full anymore, which is logical.
But the LCD shows full carts!
What mistake do or did I make that causes the ink levels staying to full?
