The all New Canon Maxify
- Thread starter The Hat
- Start date
- Thread starter
- #13
- Joined
- Jan 18, 2010
- Messages
- 15,623
- Reaction score
- 8,695
- Points
- 453
- Location
- Residing in Wicklow Ireland
- Printer Model
- Canon/3D, CR-10, CR-10S, KP-3
The cartridges are meant to stay in the print head at all times in these printers so I don’t imagine the head will suffer from any clogging because it uses some sort of vacuum to suck the ink out of the cartridges.. (Like a mini CISS)
3dogs
Printer Master
- Joined
- May 13, 2012
- Messages
- 1,013
- Reaction score
- 996
- Points
- 263
- Location
- Fern Hill, Australia
- Printer Model
- Epson 3880. Canon Pro 9000,
A small "next step" in the research/development of refill proof consumer printers. Has the dual effect of field testing consumer acceptance and operational integrity without huge outlay at the production level....why? well IMHO just another step backwards into trashy consumerism and protecting ink sales, which after all is the sole purpose of an ink vending machine with (some small) benefits 
CakeHole
Print Addict
- Joined
- Jun 25, 2014
- Messages
- 615
- Reaction score
- 455
- Points
- 163
- Location
- United Kingdom
- Printer Model
- Canon MP610
Give it a few months and i would not be shocked if our Chinese friends release a refill cart with ARC chips
- Thread starter
- #16
- Joined
- Jan 18, 2010
- Messages
- 15,623
- Reaction score
- 8,695
- Points
- 453
- Location
- Residing in Wicklow Ireland
- Printer Model
- Canon/3D, CR-10, CR-10S, KP-3
The Chinese are very good business people so I don’t imagine they will touch this printer with a barge pole until there’s a proven market for 3rd party cartridges and chips.
Smile
Printer Master
- Joined
- Aug 23, 2006
- Messages
- 1,914
- Reaction score
- 417
- Points
- 253
- Location
- Europe EU
- Printer Model
- Canon, Brother, HP, Ricoh etc.
We used to say Canon is easy to refill, this is getting not true will those cart designs and chips etc.
Carts are in the printhead?
I'd better get a Brother with OEM CISS. The cheap printer design means slushing this heavy print head will fail soon. Or did canon put back the metal guide linear motion rail? Any shots from inside the printer?
Carts are in the printhead?
I'd better get a Brother with OEM CISS. The cheap printer design means slushing this heavy print head will fail soon. Or did canon put back the metal guide linear motion rail? Any shots from inside the printer?
Łukasz
Printer Guru
- Joined
- Jul 3, 2014
- Messages
- 250
- Reaction score
- 393
- Points
- 138
- Location
- Poland
- Printer Model
- MG6250 (MG5150 before)
Is something wrong with bent metal sheet rail in general except for a chance to break of carriage?
Here on this forum was posted EEPROM and SM Test Print from MG6250 after printing 65K and seems to be no problem with print quality due to wear of bent metal sheet rail.
http://www.printerknowledge.com/threads/65536-printouts-detected-in-mg6250-eeprom.9228/
Ł.
Here on this forum was posted EEPROM and SM Test Print from MG6250 after printing 65K and seems to be no problem with print quality due to wear of bent metal sheet rail.
http://www.printerknowledge.com/threads/65536-printouts-detected-in-mg6250-eeprom.9228/
Ł.
- Thread starter
- #20
- Joined
- Jan 18, 2010
- Messages
- 15,623
- Reaction score
- 8,695
- Points
- 453
- Location
- Residing in Wicklow Ireland
- Printer Model
- Canon/3D, CR-10, CR-10S, KP-3
@Łukasz Yes that can be true of the MG 6250 but these Maxify cartridges hold 24 ml of ink each so the weight of the ink plus 4 cartridges is a lot more weight to be moving along the same type of rail..
Latest posts
-
-
-
Picture Of The Week (POW) Information and Submissions- Latest: PK Project Manager
-
