Canon Pro-100 Linux driver

lowell374

Fan of Printing
Joined
Nov 6, 2013
Messages
58
Reaction score
27
Points
58
Location
FN10
Printer Model
CanonPro-100, E2000p, LexMark
Anyone know how to install a linux driver for the Canon Pro-100 on Ubuntu or oSUSE or Debian?
If so, how?
So far, using the above listed OS's I've not been able to find any sort of driver that when installed will send a proper print stream to the network, eith0, connected printer.
As an aside, windows 7 works; but I'd rather not use that OS to print with.
 

CakeHole

Print Addict
Joined
Jun 25, 2014
Messages
615
Reaction score
455
Points
163
Location
United Kingdom
Printer Model
Canon MP610
Last edited:

opurora

Getting Fingers Dirty
Joined
Feb 13, 2011
Messages
34
Reaction score
3
Points
29
Location
San Fran
Printer Model
Pro-100, Pro9000ii
I actually have Ubuntu and it the driver is pretty limited. It's nowhere near as sophisticated as Canon's driver for photo printing which is a pity.

It seems at one time Canon was interested in providing linux drivers. See this link. Why'd they change their mind?

Also from a Gutenprint article from May they state:

3) The following Canon printer models were not added, as they cannot
currently be supported, even experimentally, owing to an as-yet
unknown command format or other issues:

Canon PIXMA mini260 *1
Canon PIXMA i255
Canon PIXMA i355
Canon PIXMA iP1180
Canon PIXMA iP1188
Canon PIXMA iP1880
Canon PIXMA iP1980
Canon PIXMA iP2580
Canon PIXMA iP2680
Canon PIXMA PRO-10 *1
Canon PIXMA PRO-100 *1

*1: protocol is supported but inks used are not yet supported
 

CakeHole

Print Addict
Joined
Jun 25, 2014
Messages
615
Reaction score
455
Points
163
Location
United Kingdom
Printer Model
Canon MP610
You wont get any third party driver as comprehensive as Canons own and as it comes for Windows. Did you try CUPS? Thats about the best i know of for Linux and one which is kept most up to date?
 

hceuterpe

Getting Fingers Dirty
Joined
Jul 22, 2011
Messages
30
Reaction score
3
Points
26
Even with a much older printer, the MP610 the gutenprint driver and overall functionality is very limited. I mainly limit it to plain paper prints, and even then it still works better in Windows, especially with dealing with duplex color printing and the Linux color matching is not quite correct, either.
 

lowell374

Fan of Printing
Joined
Nov 6, 2013
Messages
58
Reaction score
27
Points
58
Location
FN10
Printer Model
CanonPro-100, E2000p, LexMark
Thank you to everyone who replied. A special thanks to @opurora and @CakeHole . I'm trying TurboPrint currently. CUPS never seems to have all the needed functionality, IMHO.
 

Latest posts

Top