pdan's latest activity

This has been resolved!. I reset the printer to its default settings, uninstalled all the Epson drivers, then installed only the Epson...

I'm on a mac. I've printed via the following; Epson paper layout, Preview, Air print, Pixelmator epson driver. All these display the...

Interesting! I've just made the same print with Gimp. It looks fine. So its a software problem? I need to do more testing.

I'm not printing borderless. If you look at the above photo you will see a very generous white border of about 35mm on A4 office paper...

I have another issue. I'm getting magenta ink overspray on one border of the print. On landscape mode its either at the top or bottom...

Thanks for the advice! Farbenwerk also recommend rocking the printer to and fro from time to time. this helps keep the pigments in...

Getting perfect nozzle checks....All is good! Now I need to get some profiles made for the new inkset. Big thanks for all your help.

After a couple of cleans magenta and Pbk have returned. More testing and cleaning tomorrow!

There's a small srew at the bottom of the damper. Unscrewed the damper can be removed. Underneath the damper ther is no valve, but...

Sorry, but I should have been clearer. The photo is of a replcement damper part I found online. I'm still have problems trying free...

I don't see a latch.

The dampers are stuck in firm, I can't get them out. Is their a knack?

I've done two cleaning cycles without improvement, so air must be in the system.

Not sure what you mean by the currrent status

Thanks! Do I need to do this with the respective colour caps open on the front ink fill unit. What is WicReset?